基于GIS的寿宁县猕猴桃种植区提取

本文在对寿宁县当前经济发展和农业自然资源状况进行充分分析的基础上,根据猕猴桃的生长发育条件,确定相应的指标,应用GIS空间分析技术实现了寿宁县猕猴桃适宜种植区的自动提取.以此体现农业气候信息系统在种植区划上的可行性、优越性,并根据分析结果做出了相关的总结,以供有关部门参考.     

燕山褶断带中生代盆地变形-板内变形过程的记录--以下板城、承德-上板城、北台盆地为例

本文通过对燕山褶断带下板城和承德地区中生代三个世代的盆地沉积记录和变形分析,阐述了中生代燕山板内造山的发展过程。这三个中生代盆地从老至新分别是三叠纪至中侏罗世时期的下板城盆地,中侏罗世晚期至晚侏罗世的承德—上板城盆地,早白垩世的北台盆地。三个盆地发育的沉积充填序列构成了区域中生代时期的三套构造层。下板城盆地为一倒转向斜,盆地沉积充填序列为河流—冲积相沉积;承德—上板城盆地为一不对称向斜,盆地沉积充填序列为火山—冲积相沉积;北台盆地为宽缓的向斜,盆地沉积充填序列为火山沉积序列。三个世代盆地之间的变形是不协调的,应分别属于原地复杂变形的不同构造层,较新的盆地呈明显的角度不整合覆盖在经历了强烈褶皱变形的较老地层之上。划分三套构造层之间的两个区域性角度不整合的时代分别为160MA前和135MA前,相当于燕山运动A幕和B幕。     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

长江下游地区下蜀黄土堆积与成壤环境演变——以南京江北地区一典型剖面为例

通过对南京江北地区一个典型剖面（TZC剖面）进行野外调查、室内磁化率、粒度等替代性指标分析和光释光断代研究,探讨了该地区第一层古土壤形成时的粉尘堆积与成壤环境演变特点。结果表明:第一层古土壤（400⁵0cm）形成于全新世最适宜期（8500³100aBP）,是在末次冰期下蜀黄土堆积成壤基础上的再发育,与下伏黄土之间存在发生学联系。根据沉积年代和沉积厚度对沉积速率估算,该地区末次冰期沉积速率约为11.17cm/ka,而且可以推测古土壤顶部经历过强烈的水土侵蚀作用,侵蚀的厚度为98.67cm,侵蚀下来的黄土在地势低洼的地方形成次生黄土,这表明了次生黄土同为风尘成因,只是经过后期雨水的侵蚀、搬运和再堆积而已。全新世晚期3100年以来,季风转变,沙尘暴加剧,土壤退化,在南京江北地区堆积成厚约50cm左右的现代黄土层或表土层。     

GIS技术支持下的招远市金矿区崩塌遥感调查

在总结前人研究成果的基础上,全面系统地分析了诱发招远市金矿区崩塌的自然和人为因数,然后运用遥感技术对金矿区遥感图像进行处理,提取诱发崩塌的条件因子,聘请有经验的专家对各项诱发因子进行诊断分析,以此作为判断条件,在G IS技术的支持下对诱发崩塌的条件因子进行空间分析,预测出招远金矿区发生崩塌的危害程度,为防治崩塌提供科学依据。预测结果表明,招远金矿区崩塌有进一步发展的可能,其中,高危险区有36820 m2,中易发区有50 610 m2,低易发区有67 200 m2,需要采取有效措施加以防治。     

西部大开发促进区域经济协调发展的理论与实践探索

区域经济协调发展是国民经济发展的客观要求,关系到整个国民经济的战略全局。西部大开发是区域经济协调发展的内在要求和具体体现。非均衡区域经济理论是西部大开发与区域经济协调发展这一重大实践问题的核心理论,我国西部地区以其丰富的资源优势及潜在的区位优势已成为中国经济持续、快速、健康发展的新的增长点。     

理想点法在矿床工业价值评价中的应用

应用理想点法的基本原理,建立了一个矿床工业价值评价的数学模型,以我国贵州省兴义市雄武地区铀矿床为实例,构造评价函数得出最优解,结果表明:理想点法能够正确评价出矿床工业价值的大小,为矿石的最优开采提供有价值的参考。     

USB总线与CAN总线协议转换器设计

现场总线(F ield bus)是将自动控制系统中底层的现场控制器和现场智能仪表设备互连的实时控制通讯网络,是5C(Computer,Control,Commun ication,CRT,Change)技术相结合的产物。CAN(Control Area Network)总线是现场总线的一种,广泛应用于汽车行业、机械工业、家用电器、传感器等领域,已经形成国际标准,是被公认的几种最有前途的现场总线之一。提出了一种通过计算机USB接口实现现场总线CAN与计算机(服务器)之间通信的方案。具体介绍了使用USB总线接口芯片CH372和独立的CAN控制器SJA1000实现的硬件电路设计方法、本地端软件的编写方法,给出了主要程序模块的流程。     

一种实现依比例街区自动合并的算法

针对依比例街区的图形特征，介绍了一种实现街区自动合并的有效算法，即利用数学形态学和模式识别对栅格数据进行追踪，然后提取街区轮廓线，编辑后就得到最终合并的街区。